Quadpod

I made this quadpod because the normal blink mini mount to the printer was too jittery. This is a standalone, adjustable height, and mountable (using pan head screws if desired). It's pretty lightweight which is why I made it so it could be fastened to a surface. I've also incorporated a way to run the cord through and over the mount. There is an optional attachment point for the camera cord behind the arm. That piece is printed with the mount/arm and would have to be pushed in quite firmly. I've also created the gimble mount to be firm so the camera doesn't move out of position.

I used Bambu Lab PLA Matte - Nardo Gray and Bambu Lab PETG - Yellow for the arm since it has to be handled.