DryBox horizontal

Hello,

I would like to present my version of the dry box.

I was inspired by this model: Link to the model

In all the boxes I've seen so far, the spools are upright. This bothered me a lot, so I came up with a horizontal variant. The box offers the possibility to accommodate various spools but requires an adapter ring to compensate for the spool hole. It is suitable for spools with a diameter of 200 mm and a thickness of 70 mm. As I mostly use eSun or Bambulab spools, currently, I only need one size, which is 54 mm. Upon request, I can create more sizes, or you can design your own. The inner hole is 26.2 mm in diameter.

For the roller, you will need a 608 ball bearing, and for the filament outlet, a PC4-M6 connector is required. If you need a display, I used this one: Link to the product on Amazon.

It's recommended to print the sealing ring in TPU. Filament can be chosen as desired. I used PLA.