Search models, users, collections, and posts
Room model
IP Report
Print Profile(1)
0.2mm layer, 2 walls, 15% infill
Designer
2.2 h
1 plate
Open in Bambu Studio
Boost
21
32
4
2
14
4
Released
Description
3D Print Profile – Room Model (Architectural/Interior)
- Printer Type: FDM/FFF
- Material: PLA recommended (minimal warping, smooth surface finish)
- Nozzle Diameter: 0.4 mm (for general balance between detail & speed)
- Layer Height: 0.16 – 0.20 mm (fine detail for walls, windows, and furniture edges)
- Wall Line Count: 2–3 (minimum 1.2 mm wall thickness for partitions/frames)
- Top/Bottom Layers: 4–5 (0.8–1 mm solid layers for floors and ceilings)
- Infill Density: 15–20% Grid/Cubic (lightweight but supportive)
- Print Speed: 40–60 mm/s (lower for fine features like windows/doors)
- Supports: Enabled – Tree or Normal (only for overhangs > 60° such as window frames, balconies, or fixtures)
- Build Plate Adhesion: Brim (5–8 mm for larger flat floors, prevents corner lift)
- Cooling: 100% after first 3 layers (to preserve detail on thin structures)
- Retraction Settings: 1 mm @ 35 mm/s (to reduce stringing between room partitions)
- Extrusion Multiplier/Flow: 100% (adjust if walls appear under/over-extruded)
- Bed Temperature: 60 °C (PLA)
- Nozzle Temperature: 200–210 °C (adjust per filament brand)
Notes:
- For larger room layouts, consider printing in sections and assembling to avoid warping.
- Resin (SLA/DLP) printing is recommended if ultra-fine interior detail is required.
License
This user content is licensed under a Standard Digital File License.
You shall not share, sub-license, sell, rent, host, transfer, or distribute in any way the digital or 3D printed versions of this object, nor any other derivative work of this object in its digital or physical format (including - but not limited to - remixes of this object, and hosting on other digital platforms). The objects may not be used without permission in any way whatsoever in which you charge money, or collect fees.
Comment & Rating (4)