LED support

LED Hanger Clip – 3D support with cord

Description

This 3D printed model allows you to easily and securely hang LED bars or panels using a common cord. The design includes two through-holes—one upper and one lower—which, together with a small stop (additional cord or knot), ensure stable, adjustable, and reliable suspension.

Link to the LED product used

I tested the system with the LUXONIC 3 m RGBIC Neon LED Strip (IP65), available on Amazon.Amazon
You can find the product at this link:
t://www.amazon.it/dp/B0CRQZHM2Z (remove the initial space "t" to access)

Assembly Instructions

1. Pass the main cord through the upper hole of the support.
2. Slide the cord towards the lower hole.
3. Insert an additional piece of rope into the lower hole or tie a knot securely to block the passage.
4. Hang the LED bar or panel: the system remains secure but allows easy height adjustment.

Features

• Easy to print: no support required.
• Adjustable: quick adjustment of LED height.
• Robust and economical: printable in PLA, PETG, or ABS.
• Customizable: resizable according to cord diameter or expected load.

Recommended Materials

• Filament: PLA or PETG (for greater strength).
• Nylon cord or similar durable material.

Suggested Print Settings

• Layer height: 0.2 mm
• Infill: 30%
• Perimeters: 3 (to increase strength)
• Supports: not necessary
• Adhesion: brim recommended (helps prevent detachment during printing)

Applications

• Suspension of LED strips for task lighting, aquariums, or creative environments.
• Support for handcrafted lamps.
• Ideal solution in spaces where suspension must be secure yet easily adjustable.