Texture Roller - Berry Vine

Texture Roller – Berry Vine

A graceful vine studded with berries and leaflets. This 3D-printed roller presses a crisp, raised texture.

Applications

• Ceramics & Pottery: Instant embossed texture, no carving required.
• Polymer Clay: Clean detail in a single pass.

Sizes

• ✅ Medium: 120 mm height × 3.8 cm diameter
• ❌ Large: 160 mm height × 6 cm diameter
• ❌ Small: 80 mm (currently unavailable—comment if you’d like it tested)

Style

• ✅ Embossed
• ❌ Seamless
• ✅ One full repeat per roll
• ❌ Debossed: Not available (yet). Comment if you’d like it evaluated.

Custom Sizing (print at your own risk)

• Scaling up → deeper grooves; scaling down → shallower grooves.
• Medium & Large share the same designed depth—start from the closest size.

Tested Print Settings

• Layer height: 0.16 mm
• Infill: 10% Crosshatch
• Perimeters/Walls: 2 recommended

• Raft: Not needed on direct-drive; use a 3-layer raft on bedslingers (especially Large).

   

Usage Tips

• Roll on soft/pliable clay for the cleanest edges.
• Light cornstarch dusting helps prevent sticking.

Handle

• Not included yet. A compatible handle system is in development.