trevoryour

cover

Screenshot 2025-07-27 114653.png

plate_1.png

2025-07-27_cc87abde1bf918.webp

Project: fire.hfp Print at 100% infill with a layer height of 0.08mm with a base layer of 0.16mmThe Model is 168.42x200mm in size You may print at higher layer heights below the Min Depth of 0.48mm The Max Depth is 2.2mm and the Actual Depth is 2.3mmFilaments Used:     PLA BambuLab Basic Black Transmission Distance: 0.6     PLA BambuLab Matte Dark Brown Transmission Distance: 2     PLA BambuLab Basic Red Transmission Distance: 4     PLA BambuLab Basic Yellow Transmission Distance: 6     PLA Default White Transmission Distance: 5 This print uses 5 unique filamentsSwap Instructions:     Start with Black     At layer #6 (0.56mm) swap to Dark Brown     At layer #12 (1.04mm) swap to Red     At layer #15 (1.28mm) swap to Yellow     At layer #22 (1.84mm) swap to White for the rest.

0.08mm layer, 2 walls, 100% infill

This model was requested on Reddit.  Its a hueforge drawing of fire burning a log

Print Profile(1)

Description

Comment & Rating (0)

License

Related Models

Fire burning log

Print Profile(1)

Description

Comment & Rating (0)

License

Related Models