Mailbox Bracket (Customizable)
Print Profile(1)
Description
Boost Me (for free)
Boosts are the best and cheapest way to demonstrate your appreciation of someone's work here on MakerWorld, so please send one in my direction if you find this model useful.
This model, which I reccomend to print in some weather resistant material, like ABS or ASA, is intended to help in fixing a mailbox to posts, like in my case, to a small entrance gate.
To assembly you need self tapping screws of the appropriate size, in my case they were 3.5mm x 16mm for binding the bracket (4 for each bracket, 8 in total) plus 4mm x 20mm for fixing the box to the bracket (1 per each bracket, 2 in total).
If you customize the model please don't forget to switch the M3F project to an appropriate strong profile:
- 4+ walls
- 5+ top and bottom layers
- 15%+ giroyd infill
- supports are not needed
This is my very first customizable item, so please be patient and double-check the produced output.
License
You shall not share, sub-license, sell, rent, host, transfer, or distribute in any way the digital or 3D printed versions of this object, nor any other derivative work of this object in its digital or physical format (including - but not limited to - remixes of this object, and hosting on other digital platforms). The objects may not be used without permission in any way whatsoever in which you charge money, or collect fees.
Comment & Rating (1)