Print Profile(1)
Description
My mum asked if I could do a print of a friends dog who had sadly passed away and I came up with this, she was very pleased.
Print at 100% infill with a layer height of 0.08mm with a base layer of 0.16mm
The Model is 111.11x200mm in size
You may print at higher layer heights below the Base Thickness of 0.48mm
The Max allowed Thickness is 2.24mm and the Actual Thickness is 2.24mm
Filaments Used:
#000000 PLA+ Sunlu Black Transmission Distance: 0.6
#f8ef99 PLA Sunlu Meta yellow Transmission Distance: 10
#ffffff PLA+ Sunlu White Transmission Distance: 5
This print uses 3 unique filaments
Swap Instructions:
Start with Black
At layer #11 (0.96mm) swap to yellow
At layer #22 (1.84mm) swap to White for the rest.
License
You shall not share, sub-license, sell, rent, host, transfer, or distribute in any way the digital or 3D printed versions of this object, nor any other derivative work of this object in its digital or physical format (including - but not limited to - remixes of this object, and hosting on other digital platforms). The objects may not be used without permission in any way whatsoever in which you charge money, or collect fees.
Comment & Rating (0)