Teufel_2

Print at 100% infill with a 0.08mm layer height and a 0.16mm base layer

The model measures 140.63 x 200mm
Higher layer heights may be used below the minimum depth of 0.48mm
The maximum depth is 2.2mm, and the actual depth is 1.3mm

Filaments Used:
    Bambu Lab PLA Basic Black Transmission Distance: 0.6
    Bambu Lab PLA Basic Blue Gray Transmission Distance: 3
    Bambu Lab PLA Basic Gray Transmission Distance: 2
    Bambu Lab PLA Basic Jade White Transmission Distance: 5

This print utilizes four distinct filaments

Filament Swap Instructions:
    Begin with Black
    Swap to Blue Gray at layer #8 (0.72mm)
    Swap to Gray at layer #9 (0.8mm)
    Swap to Jade White at layer #10 (0.88mm) and continue

.

.

.

If you enjoy my work, please like and follow me, it would be greatly appreciated