Ceiling Hooks
Print Profile(1)
Description
These two ceiling hook models (large and small) are ideal for hanging light to medium-weight items from the ceiling. They are specifically optimized for 3D printing with PLA and are easy to assemble without additional hardware. Below you will find all important information, printing recommendations and application notes.
1. Model Overview
Large Ceiling Hook
Load category: up to approx. 2 kg (depending on layer adhesion and embedding in the ceiling)
Hook opening diameter: ~15 mm
Total length: ~50 mm
Small Ceiling Hook
Load category: up to approx. 2 kg
Hook opening diameter: ~10 mm
Total length: ~35 mm
Note: The stated load values refer to optimally printed and assembled parts. Always allow a small safety margin.
2. Design Features & Tips
Rounded edges: Prevent damage to suspended straps or ropes.
Smooth inner surface: Minimizes material abrasion on the suspended object.
PLA color: Light colors (e.g., white, light gray) are inconspicuous in many interiors.
3. Safety Instructions
Not for load-bearing purposes: These hooks are not suitable for safety-relevant applications (e.g., for hanging heavy lamps or persons).
Regular inspection: Check for cracks or material fatigue before each use.
Ambient temperature: PLA loses strength at approx. 60 °C – do not use in hot environments.
Happy printing and assembling! Please provide feedback if you have any questions or optimization ideas.
License
You shall not share, sub-license, sell, rent, host, transfer, or distribute in any way the digital or 3D printed versions of this object, nor any other derivative work of this object in its digital or physical format (including - but not limited to - remixes of this object, and hosting on other digital platforms). The objects may not be used without permission in any way whatsoever in which you charge money, or collect fees.
Comment & Rating (2)