Adaptative Spool Stand

Adaptative Spool Stand
 

Inspired by the great work of @nkssbl, i want to do a stand that can adapt for every spool. 

So i make this little spool stand with on 2 pieces.
You can print it like this or 2 guide to put the spool on.
No support needed if your printer can make good bridge, or juste some little under the “guide”

It took less than 1 hour to print and use only 15g of filament on my N4 Pro.

Print setting :

0.2 or 0.1 layer height
3 or more perimeters
Minimum 15% infill
Print slow the first layer and be sure to have a bed perfectly leveled.
Can use a brim to help adhesion 

(If u enjoy my design u can like, follow and tip me)