Wolf Knight

All of the pictures displayed are of the actual models. Please take a moment to rate and endorse the models, as it is very helpful.

Print at 100% infill with a layer height of 0.08mm with a base layer of 0.16mm

The Model is 107.8x170mm in size
You may print at higher layer heights below the Min Depth of 0.48mm
The Max Depth is 2.2mm and the Actual Depth is 2.2mm

Filaments Used:
    PLA BambuLab Basic Black Transmission Distance: 0.6
    PLA BambuLab Basic Blue Gray Transmission Distance: 3
    PLA BambuLab Basic Blue Transmission Distance: 4
    PLA BambuLab Basic Red Transmission Distance: 4
    PLA BambuLab Basic Brown Transmission Distance: 2
    PLA BambuLab Matte Scarlet Red Transmission Distance: 2
    PLA BambuLab Matte Dark Brown Transmission Distance: 2
    PLA BambuLab Basic Yellow Transmission Distance: 6
    PLA BambuLab Basic Gray Transmission Distance: 2
    PLA BambuLab Basic Beige Transmission Distance: 8
    PLA BambuLab Basic Jade White Transmission Distance: 5
This print uses 11 unique filaments

Swap Instructions:
    Start with Black
    At layer #6 (0.56mm) swap to Blue Gray
    At layer #7 (0.64mm) swap to Blue
    At layer #8 (0.72mm) swap to Blue Gray
    At layer #10 (0.88mm) swap to Red
    At layer #11 (0.96mm) swap to Brown
    At layer #12 (1.04mm) swap to Scarlet Red
    At layer #13 (1.12mm) swap to Dark Brown
    At layer #14 (1.2mm) swap to Yellow
    At layer #15 (1.28mm) swap to Gray
    At layer #23 (1.92mm) swap to Beige
    At layer #25 (2.08mm) swap to Jade White
    At layer #27 (2.24mm) swap to Black for the rest.