Wolf blue

All of the pictures displayed are of the actual models. Please take a moment to rate and endorse the models, as it is very helpful.

Print at 100% infill with a layer height of 0.08mm with a base layer of 0.16mm

The Model is 200x159.69mm in size
You may print at higher layer heights below the Base Thickness of 0.48mm
The Max allowed Thickness is 2.24mm and the Actual Thickness is 2.08mm

Filaments Used:
    #000000 PLA BambuLab Basic Black  Transmission Distance: 0.6
    #00358e PLA BambuLab Basic Blue  Transmission Distance: 4
    #0086d6 PLA bambu cyan  Transmission Distance: 4
    #ffffff PLA BambuLab Basic Jade White  Transmission Distance: 5
This print uses 4 unique filaments

Swap Instructions:
    Start with Black
    At layer #7 (0.64mm) swap to Blue
    At layer #9 (0.8mm) swap to cyan
    At layer #19 (1.6mm) swap to Jade White
    At layer #28 (2.32mm) swap to Black for the rest.