Forest Cat
Print Profile(1)
Description
A Wildcat - HueForge in the size of 200 x 200mm and 3 colors.
The image is 200x200mm in size and can be scaled as desired. Please note that only "X" & "Y" may be scaled, but NEVER "Z"!
Info:
If Bambu Studio complains about floating parts, either ignore it or turn on supports. In both cases, nothing will happen, and it won't print supports, but it has a blurred image edges and Studio thinks it has floating parts.
Print Instruktion:
Print at 100% infill with a layer height of 0.08mm with a base layer of 0.16mm.
Swap Instructions:
Start with Charcoal At layer #9 (0.8mm) swap to Red
At layer #11 (0.96mm) swap to Orange
At layer #16 (1.36mm) swap to Yellow
At layer #23 (1.92mm) swap to Ivory White for the rest.
Filaments Used:
PLA BambuLab Matte Charcoal Transmission Distance: 0.6
PLA BambuLab Basic Red Transmission Distance: 4
PLA BambuLab Basic Orange Transmission Distance: 5
PLA BambuLab Basic Yellow Transmission Distance: 6
PLA BambuLab Matte Ivory White Transmission Distance: 4
You can find more pictures on my profile and the matching frames for the pictures on @ConnyNRW Profile.
License
You shall not share, sub-license, sell, rent, host, transfer, or distribute in any way the digital or 3D printed versions of this object, nor any other derivative work of this object in its digital or physical format (including - but not limited to - remixes of this object, and hosting on other digital platforms). The objects may not be used without permission in any way whatsoever in which you charge money, or collect fees.
Comment & Rating (0)