user_703481669

Bambu Lab A1 X-axis drag chain, tank chain

2025-10-27_e9792c49f4f7b.png

微信图片_20260606072148_31_2.jpg

2026.6.6最新版，修复各种问题，请打印这个配置

2026.6.6 latest version, fixed various issues, please print this profile

A1XAxisCableChain1.jpg

A1XAxisCableChain2.jpg

WhatsAppVideo2025-12-01at11.49.58AM-ezgif.com-video-to-gif-converter.gif

PixelFanLabs

Dual Color (2 Plate, No AMS) - 30-50% Infill - Narrow Chain

Снимок экрана_20260409_012439.png

Снимок экрана_20260409_012503.png

photo_1_2026-04-09_01-29-48.jpg

photo_2_2026-04-09_01-29-48.jpg

photo_3_2026-04-09_01-29-48.jpg

photo_4_2026-04-09_01-29-48.jpg

photo_5_2026-04-09_01-29-48.jpg

yuvg

0.2mm layer, 2 walls, 15% infill | For AMS at the top

20260208_170728.jpg

Guide example.gif

FIRED

Chainless version with extended guide

拓竹A1 X轴电缆拖链，坦克链

A1 mini X-axis Cable Chain, Non-destructive Installation

2025-10-19_c4b464dbe08d6.png

0.2mm 层高, 3 层墙, 50% 填充，不用支撑

0.2mm layer, 3 walls, 50% infill, no supports

Screenshot 2026-01-12 at 6.27.01 PM.png

Pragmatic Design

Bigger cable entrance to avoid sudden bending

IMG_3208.jpeg

Owen K

Thinnner cover for stock screws

A1mini X轴电缆拖链，无损安装

A1 mini X-axis front horizontal cable chain, lightweight and support-free

微信图片_20250707175930.png

微信图片_20250707155338.jpg

这个是分体安装的，使用 pteg 等有韧性的耗材推荐使用这个配置打印，pla lite和matte请不要打印这个配置

This is a split installation, it is recommended to use this configuration for printing with flexible materials such as PETG, please do not print this configuration with PLA Lite and Matte

微信图片_20250707155342.jpg

QQ_1751892265862.png

这个是拖链一体打印的配置，mini尺寸太小分成了2段。另一个是分开安装的，安装有点难度，需要petg等有韧性的耗材打印

This is a configuration for a single-piece printed cable chain, the mini size is too small and is divided into two sections Another is a separate installation, the installation is somewhat difficult, requiring the printing of flexible filaments such as PETG

QQ_1751892223918.png

256尺寸打印机的请打印这个配置

For 256-size printers, please print with this configuration

A1 mini X轴前置横向拖链，轻量化免支撑

Bambu A1 X-Axis Cable Chain, Lightweight Tank-Style Design

微信图片_20250604184109.jpg

0.2mm 层高, 3 层墙, 100% 填充

0.2mm layer, 3 walls, 100% infill

微信图片_20250610095803.jpg

微信图片_20250708152434.png

拖链2段打印版，pla等非高韧耗材请打印这个配置

Two-section drag chain, print version, for PLA and other non-high-toughness filaments, please use this configuration

IMG_1765(1).jpg

IMG_1764(1).jpg

Couleur 1

Couleur 2

Ajustement couleur 1

Ajustement couleur 2

Gado3DFusion

0.2mm layer, 4 walls, 50% infill

拓竹A1 X轴拖链 横向轻量化坦克链

A1 mini X-axis cable chain, lightweight rear-mounted horizontal design

微信图片_20250529144003.jpg

A1mini X轴拖链，横向设计轻量化后置版

Bambu Lab A1 Side Drag Chain Z-Axis Drag Chain

微信图片_20250526195827.jpg

0.2mm 层高, 3 层墙, 30% 填充，模型比较细小，请适量添加brim防止翘边

0.2mm layer height, 3 walls, 30% infill, The model is relatively small, please add an appropriate amount of brim to prevent warping

IMG_0250.JPG

Better Bed Adhesion - PLA print

拓竹A1侧拖链 Z轴坦克链

A1 mini Side Cable Chain - New Version

微信图片_20250620105005.jpg

这个是最新配置，请打印该配置

This is the latest configuration, please print this configuration

A1mini侧边拖链新版

Earn this badge when visit MakerWorld more than 20 days in last 30days UTC time

MakerWorld Guardian