0.2mm layer, 2 walls, 20% infill

Single plate: five pieces, filament changes: 5 times

0.2mm layer, 2 walls, 5% infill

The design spans two plates with the mushroom stem rendered in multiple colors and the mushroom cap printed separately

No AMS required, assembled from 3 plates, print in parts

Multicolor printing (requires AMS)

Single-plate per-piece printing (requires AMS)

0.28mm layer, 2 walls, 8% infill

0.28mm layer, 2 walls, 8% infill

0.2mm layer height, 2 walls, 15% infill, individual prints no supports

No AMS required, printing will pause automatically, manually change filament and click continue to resume printing

0.2mm layer height, 2 walls, 5% infill/single material swap

0.28mm layer, 2 walls, 15% infill

A1 mini exclusive, single plate, 4 pieces, 0.2mm layer height, 2 walls, 5% infill

P-structure bed single plate 15 pre-arranged, 0.2mm layer, 2 walls, 5% infill

A1 exclusive, single plate 16 pre-arranged, 0.2mm layer, 2 walls, 5% infill

0.2mm layer, 2 walls, 5% infill

0.28mm layer height, 1 wall “Rotating Vase” print mode

Two parts (for mini)

0.2mm layer, 2 walls, 5% infill