it's a pretty involved print but makes for a fun gift giving experience and works really well.

easy to print, I sewed it on by hand so I can't speak to how well it would work with a machine but seems like a perfectly fine button and works really well.

the case feels very strong and rugged and the locking mechanism is secure and operates smoothly. One concern is that the lenses are touching the plastic so I am worried they will get scratched, you could probably print a little tpu insert to glue in place or just use a cloth like I do. but the bigger issue is that with all of the items inside if you lock it closed they can still come out of their places and rattle around inside the case itself if it is flipped upside down.

printed two, one went together perfectly and the screw operates smoothly, the other had some trouble and is less smooth when screwing the cap on. I suspect the tube I was using may have had some minor damage, I don't think it's an issue with the print. I do like how they can stack in top of each other. I didn't need glue for either one and both feel secure.

prints easily, works well although I did need to use a little super glue to make it stay together. I also opted to make the extension ring so I could use two rolls, it's nice to have a taller container. no more throwing rolls away.

easy to print, looks great, prints quickly. makes for a great keychain.

prints great, looks fantastic. makes a great bookmark, I use them as Christmas ornaments.

Works really well. I find that it has a tendency to pull the mutuboard away from the wall and sag slightly depending on the weight of the spool and how close it is to place where the board screws into the wall. I mostly use it for partial rolls to help alleviate this issue.

this is a great model, the pictures don't do it justice it looks so good in person. the stand also works well to display the finished ball.

printed well, articulates as it should. My 2 year old thought it was super interesting. I printed it with green Bambu PLA and it came out great.

great model, I ended up cutting it in half and embedding a magnet.

works perfectly and significantly cheaper than ordering something similar from Amazon.

printed well, just glued on some ear ring backs and they made for some easy gifts.

prints well and works great, I did have to find a multi board screw model to print to actually make it work but other than that it was perfect.

printed well out of PLA, it does print flat and I used a heat gun to bend the butterfly to make it work. when heating be careful of the antenna, they are thin so they will heat up faster than the body if you aren't careful.