Hulk V2
Print Profile(2)
Description
Print at 100% infill with a layer height of 0.04mm with a base layer of 0.16mm
The Model is 112.11x200mm in size
You may print at higher layer heights below the Min Depth of 0.48mm
The Max Depth is 2.3mm and the Actual Depth is 2.2mm
Filaments Used:
PLA BambuLab Basic Black Transmission Distance: 0.6
PLA BambuLab Basic Jade White Transmission Distance: 5
PLA Chrominal Shadow Gray Transmission Distance: 3
PLA INLAND RED Transmission Distance: 3.7
This print uses 4 unique filaments
Swap Instructions:
Start with Black
At layer #16 (0.76mm) swap to Jade White
At layer #31 (1.36mm) swap to Shadow Gray
At layer #33 (1.44mm) swap to RED
At layer #40 (1.72mm) swap to Jade White for the rest.
License
You shall not share, sub-license, sell, rent, host, transfer, or distribute in any way the digital or 3D printed versions of this object, nor any other derivative work of this object in its digital or physical format (including - but not limited to - remixes of this object, and hosting on other digital platforms). The objects may not be used without permission in any way whatsoever in which you charge money, or collect fees.
Comment & Rating (2)