BIG park

cover

IMG_3737(20241123-222228).PNG

SDOutputImage.png

IMG_3455.JPG

SKK不急

plate_1.png

11.26-第五版-减少层纹-修改底盘-让皮卡丘站的更稳，打印效果更好。可以单色打印再上色，也可以直接多色打印。建议一次添加多个打印。

November 26 - Fifth version - Reduced layer lines - Modified base - Allows Pikachu to stand more stably, resulting in better print quality. Can be printed in a single color and painted later, or directly printed in multiple colors. It is recommended to add multiple prints at once.

0.16mm layer height, 2 walls, 10% infill. Last updated November 26.

11.26-第五版-皮卡丘-一次6个A1mini可打

11.26-Fifth edition-Pikachu-Six A1 mini can be printed at a time

0.16mm layer, 2 walls, 10% infill. Six A1 mini can be printed at a time

11.26-第五版-皮卡丘-修改多色-修改底盘-修改支撑-只需要尾巴少部分支撑即可打印-，同样的模型减少71次换色，减少两小时20分钟，减少42克冲刷-修改支撑-手机上打印的时候可以添加文件个数，一次打好几个

November 26th - Fifth version - Pikachu - Multicolor modification - Base modification - Support modification - Only requires minimal support for the tail - Same model, 71 fewer color changes, 2 hours and 20 minutes less printing time, 42 grams less purging - Support modification - When printing on a mobile device, you can add multiple files and print several at once

0.16mm layer height, 10% infill. November 26th - Fifth version - Multicolor modification - Base modification - Stands more steadily, 71 fewer color changes, two hours less printing time, 42 grams less filament used

You shall not share, sub-license, sell, rent, host, transfer, or distribute in any way the digital or 3D printed versions of this object, nor any other derivative work of this object in its digital or physical format (including - but not limited to - remixes of this object, and hosting on other digital platforms). The objects may not be used without permission in any way whatsoever in which you charge money, or collect fees.

This user content is licensed under a Standard Digital File License.

<boostme><boosttitle>为我助力</boosttitle><boostcontent>免费助力，支持作者</boostcontent></boostme>11.26-第五版-皮卡丘-修改多色-修改底盘，站的更稳，更不会翻车。同样的模型减少71次换色，减少两小时20分钟，减少42克冲刷。从图片模型测试到模型精修后到上色再次修改，目前已经修改3色AMS打印。也可以选择单色打印后手动上色。整个模型只有尾部是用了少量支撑，身体部位不需要支撑，打印测试没问题。

<boostme><boosttitle>Boost Me</boosttitle><boostcontent>Free boost, support the creator</boostcontent></boostme>11.26 – Fifth Version – Pikachu – Multicolor Modification – Modified chassis for enhanced stability and reduced tipping. This model iteration reduces color changes by 71, saving two hours and twenty minutes, and minimizing filament waste by 42 grams. From initial image testing through model refinement and subsequent coloring adjustments, three-color AMS printing has been optimized. Single-color printing followed by manual coloring is also an option. Only minimal supports are required for the tail; the body prints without supports, and testing confirms successful printing.

Print Profile(3)

Description

Comment & Rating (90)

License

Related Models