Effect Plate Model
Print Profile(2)
Description
PLEASE READ:
I have uploaded a profile to enable excellent printing on the carbon fiber effect plates. I believe this profile can be used on any effect plate as well. All you need to do is download and open the model, delete the disc loaded in, and add your part. I have also uploaded screenshots of all the settings I adjusted. I followed several reddit threads to make these settins, and attempted many prints. Trust me, this profile is the best I was able to achieve with PETG. If you want to print PLA, you should only need to decrease the plate temp to 75 degC for first layer (10 deg over the default), and decrease the nozzle temp to 265 degC for the first layer (35 degC over the default). PLA has shown success. Make sure that you also have smooth hight temp PEI plate selected if it is not already.
ATTN: to print on the effect plates flawlessly, you require high nozzle temps, which means the hardened steel nozzles are highly recommended for PLA and a must for PETG.
Dev Mode: development mode needs to be activated in the bambu slicer to access some of these settings!
Make sure to place the face down on which you want the effect to appear on!
Boost Me (for free)
This took a lot of test prints to get right. I appreciate all the boosts!
License
You shall not share, sub-license, sell, rent, host, transfer, or distribute in any way the digital or 3D printed versions of this object, nor any other derivative work of this object in its digital or physical format (including - but not limited to - remixes of this object, and hosting on other digital platforms). The objects may not be used without permission in any way whatsoever in which you charge money, or collect fees.
Comment & Rating (0)