douro • drawer module

douro • drawer module

modular drawer system, with magnetic inserts and an array of configuration options, horizontal or vertical, and optional wall mount setup, for a flexible and aesthetic organisation system

~ dimensions in mm

• single  ~ x • 178 · y • 65· z • 80
• double  ~ x • 178 · y • 125 · z • 80

important

• components divided into print profiles, each having plates with different options so that you can select layouts more easily
• requires 6x 5x10x2mm magnets for the single module or 12x 5x10x2mm magnets for the double module
• make sure that you are very mindful of the polarities of the magnets when assembling in their spots as you want to make sure that module and inserts attracts to each other and not repels
• the modules print profile include pauses to add the magnets as it facilitates over adding them only when the print is over
• the wall holders are printed at an angle for increased strength, it has in-designed supports, and on the slicer the design is split to objects to ensure a clean connection and making them easy to snap-off (slicer may warn about objects being too close, but that is what is expected)
• filament should be dry and calibrated so that it deals appropriately with printing the patterns
• build plate must be properly clean so that there aren't adhesions issues and lifts during the print

photos show printed in pla-cf, pla marble and pla matte

• .40mm nozzle
• adaptive layer height
• 15% adaptive cubic infill
• no supports (in-designed support included on the optional wall mounts)
• ironing on topmost surface on the modules and inserts
• print pause on the modules to more easliy add the magnets

notes

• commercial licence membership available on my patreon
• all photos uploaded are of the actual printed model, and are copyright protected
• if you enjoy this model please consider to buy me a coffee
• includes bambu studio 3mf files and STLs

follow me on instagram to stay updated on new releases • h3li0.design