Cell
Print Profile(1)
Bill of Materials
- Bambulab Gris x 1: Bambulab Gris PLA Basic
- Bambulab Blanco x 1: Bambulab Blanco PLA Basic
- eSun Verde x 1: eSun Verde PLA Basic
- eSun Negro x 1: Esun Negro PLA Basic
Description
Project: cell3jade.hfp
Print at 100% infill with a layer height of 0.08mm with a base layer of 0.16mm
The Model is 116.36x160mm in size
You may print at higher layer heights below the Base Thickness of 0.48mm
The Max allowed Thickness is 2.24mm and the Actual Thickness is 1.92mm
Filaments Used:
#000000 PLA eSUN Negro Transmission Distance: 0.3
#545454 PLA BambuLab Basic Dark Gray Transmission Distance: 0.6
#009900 PLA eSUN Verde Transmission Distance: 2.4
#ffffff PLA BambuLab Basic Jade White Transmission Distance: 5
This print uses 4 unique filaments
Swap Instructions:
Start with Negro
At layer #8 (0.72mm) swap to Dark Gray
At layer #13 (1.12mm) swap to Verde
At layer #17 (1.44mm) swap to Jade White for the rest.
License
You shall not share, sub-license, sell, rent, host, transfer, or distribute in any way the digital or 3D printed versions of this object, nor any other derivative work of this object in its digital or physical format (including - but not limited to - remixes of this object, and hosting on other digital platforms). The objects may not be used without permission in any way whatsoever in which you charge money, or collect fees.
Comment & Rating (0)