Easter Bunny with Bow

🐰 Stylish Easter Bunny

Bring a fresh spring breeze to your print bed! This bunny stands out with its modern, clean lines and subtle surface texture that elegantly conceals print lines. Whether as a subtle decoration or a colorful eye-catcher, this model is optimized for maximum compatibility and easy scalability.

🛠️ Model Options

To ensure every maker can get the most out of their setup, the model is available in three technical versions:

• Single Color: Perfect for classic printing. Looks especially elegant in PLA Silk or matte pastel tones.
• Dual Color: Optimized for printers with IDEX or easy filament changes (e.g., body and bow separated).
• Multi Color (AMS Ready): Fully prepared 3MF file for Bambu Lab AMS. Body, eyes, and bow are defined as separate instances for a clean finish without colors bleeding into each other.

📏 Available Sizes

The set is configured in three perfectly matched proportions:

• Small: 100 mm (Fast print, ideal as a small gift)
• Medium: 130 mm (The standard size for the dining table)
• Large: 160 mm (Statement piece with high detail fidelity)

⚙️ Print Settings (Recommended)

To achieve the best results, please note the following:

• Support: A small support is only needed under the bow. I recommend "Tree Support" (Slim), as it can be removed without residue and protects the surface.
• Adhesion: A narrow brim (2 mm) at the base is advisable to prevent taller models from tipping over during fast print head movements.
• Infill: 10–15% (Gyroid recommended for uniform stability).
• Wall thickness: At least 3 walls for an opaque surface, especially with light colors.

💡 Pro Tip for Makers

For the "chocolate look", try a brown PLA Matte, and for a modern look, use "fuzzy skin" to give the bunny a velvety texture!

Happy printing!

I look forward to seeing your pictures and ratings in the Makes!