Stand Z10 Flashlight Diffuser

Foreword

My Standard Z10 flashlight, which I bought yesterday, just arrived. When testing it, I found that the included diffuser is really difficult to use. It's made very soft for portability and easy storage, but it's hard to secure, and the magnet's strength is insufficient. So, I decided to make my own~

Printing Details

1. This model is divided into 2 plates, one plate of PETG and one plate of TPU

2. The tolerance is set to 0.1, so there should be no major issues, with 0.1 reserved throughout

3. This model requires magnets; you can place 1-8 as you see fit, I used 8. The size is 2.5mm*6mm

Installation Process

First, slide the TPU onto the flashlight; it will lock into place with the limit stop.

Then, fit the main body over the TPU. I initially thought glue would be needed, but it's not; just align it slowly.

Place the magnets into the top cover. If the size is correct, they will be slightly snug; just tap them in with something, no worries.

Finally, fit the top cover onto the main body, and you're done.

Other than that, there's nothing else to say. 70g (PETG) + 8g (TPU), very sturdy, just use it.