Fighting Mech

Battle Mech

This model is a mech ornament. Its limbs can be posed arbitrarily and are not fixedly connected to the body

The early version was designed as a remote-controlled CB kit, with all limbs controlled by servos. The left cannon barrel could rotate, and the right cannon had retractable firing. Everything was debugged, but the servo load capacity for the limbs was insufficient, so the powered version was abandoned. A simple unpowered version was eventually created. In the future, if there's an opportunity, voice and AI control could be added, and replacing with stepper motors might be a much better solution

Assembly requires M2*8 screws and glue

There are two versions in the print files: a regular non-lighted version and a magnetic control light version

Magnetic control lights are available at Maker's Supply, and the model number is specified in the installation drawings. The central main light can be DIYed, with reserved space for LEDs and batteries, allowing you to choose and install your own lighting

Model dimensions: Length 110mm X Width 120mm X Height 120mm

If you need to scale up for printing, you need to consider the screw size. The current model uses M2 screws. If using M2.5 screws, the model needs to be scaled up 1.25 times. If using M3 screws, the model needs to be scaled up 1.5 times