Mayakovsky
Print Profile(0)
Description
Print at 100% infill with a layer height of 0.08mm with a base layer of 0.16mm
The Model is 151.49x215mm in size
You may print at higher layer heights below the Base Thickness of 0.48mm
The Max allowed Thickness is 2.24mm and the Actual Thickness is 2.23997mm
Filaments Used:
#080a0d PLA PolyLite Black Transmission Distance: 0.3
#7d1112 PETG BambuLab Basic Red Transmission Distance: 2.5
#f2eada PETG BambuLab Basic Nature Transmission Distance: 2.8
This print uses 3 unique filaments
!!!! It appears you have mixed filament types. Be certain this is what you want. !!!!!
Swap Instructions:
Start with Black
At layer #10 (0.88mm) swap to Red
At layer #22 (1.84mm) swap to Nature for the rest.
License
You shall not share, sub-license, sell, rent, host, transfer, or distribute in any way the digital or 3D printed versions of this object, nor any other derivative work of this object in its digital or physical format (including - but not limited to - remixes of this object, and hosting on other digital platforms). The objects may not be used without permission in any way whatsoever in which you charge money, or collect fees.
Comment & Rating (2)