Armored Cat

Print at 100% infill with a layer height of 0.04mm with a base layer of 0.16mm

The Model is 200x199.7mm in size
You may print at higher layer heights below the Base Thickness of 0.48mm
The Max allowed Thickness is 2.24mm and the Actual Thickness is 1.84mm

Filaments Used:
    #000000 PLA Bambu Basic Black  Transmission Distance: 0.1
    #686a6c PLA Bambu Matte Nardo Gray  Transmission Distance: 0.3
    #4c5f71 PLA Bambu Basic Blue Gray  Transmission Distance: 2.6
    #ddd7c7 PLA+ Esun Bone White  Transmission Distance: 4.9
    #ffffff PLA Bambu Basic Jade White  Transmission Distance: 6.3
This print uses 5 unique filaments

Swap Instructions:
    Start with Black
    At layer #16 (0.76mm) swap to Nardo Gray
    At layer #18 (0.84mm) swap to Blue Gray
    At layer #23 (1.04mm) swap to Bone White
    At layer #34 (1.48mm) swap to Jade White for the rest.