Auge_1

Print with 100% infill, a 0.08mm layer height, and a 0.16mm base layer

The model measures 200x200mm
Higher layer heights may be used below the minimum depth of 0.48mm
The maximum depth is 2.2mm, and the actual depth is 1.6mm

Filaments Used:
    Bambu Lab PLA Basic Black Transmission Distance: 0.6
    Bambu Lab PLA Basic Red Transmission Distance: 4
    Bambu Lab PLA Basic Yellow Transmission Distance: 6
    Bambu Lab PLA Basic Jade White Transmission Distance: 5

This print utilizes four distinct filaments

Filament Swap Instructions:
    Begin with Black
    Swap to Red at layer #8 (0.72mm)
    Swap to Yellow at layer #10 (0.88mm)
    Swap to Jade White at layer #12 (1.04mm) and continue

.

.

If you enjoy my work, please show your appreciation with a LIKE and a FOLLOW I would be very grateful