Easter Carved Egg

Easter Carved Egg

• Provided configuration size is 47.5X49X59mm, can be scaled according to your needs, or you can color it yourself
• 0.2 variable layer height, minimal supports, one-click printing with your phone
• If the overhang quality is not ideal, pay attention to heat dissipation! Pay attention to flow calibration and filament drying!
• Any questions can be raised in the comments section, and I will improve them in a timely manner.

Printing Tips and Precautions

(Most models released by creators have been tested, and any problems can also be actively discussed in the comments section)

I will explain some precautions below, you can also ask the customer service or check the Bambu Wiki for more questions, you can learn a lot therePrint Quality and Troubleshooting | Bambu Lab Wiki

• Ensure the build plate is clean, and it is recommended to clean the build plate regularly!Oil residue from your hands after touching the print bed will greatly reduce the print adhesion, and small residues from previous prints will also affect the quality of the first layer, thus reducing the yield.
• Pay attention to filament drying, this will greatly affect your printing quality and printing experience! Filaments that have been stored for a long time will inevitably become damp, if stringing occurs, it is recommended to ask the manufacturer for drying parameters to dry the filament, at the same time,most manufacturers' filaments are not dried when they leave the factory, so our newly opened filaments are still a little damp, and it is also recommended to dry them before use.
• When using new filaments from manufacturers, it is recommended to start printing immediately calibrate the filament flow, and modify the calibration coefficient, this will greatly affect your printing quality, and it is also a necessary process to allow the new filament to adapt to your printer.
• If you encounter a sudden drop in print quality and yield, check if the nozzle is clogged, or try recalibrating the printer.
• Print at the recommended speed in the model instructions. Overhang quality is directly related to printing speed,an appropriate speed (too fast or too slow is not good) allows the material more time to cool and form when it is deposited.
• Set the bed and nozzle temperature reasonably according to different materials.Too high or too low temperature will cause warping, layered deformation or adhesion problems, thus affecting the printing quality and success rate.