This looks really good finished and works well too, the tolerance on the threaded parts is super tight though. I printed 2 and cracked a few threaded parts on the first one. I ended up glueing them together as they are fine being permanent. For the second I just used a file and took down the OD and opened up the threads with a triangle file before assembly and they worked just fine.

They work ok but making the large post a bit longer to better support and stay in place would be even better.

Works great and a very clean and simple solution for cleaning plates

A little tight to get on the spool rim but holds well once on.

Seems to work ok but is a lot smaller then I expected, I might have missed it and should have checked when preparing the print but showing finished dimensions on the listing would be helpful.

They do a good job, but the PTFE tube that came with the P1S/AMS fits really loose so a couple pulled out when fist loading and the AMS cycled the spool. Has not pulled out since so maybe the reduced humidity and use as allowed them to seat better.

Fit perfectly and is good and secure.

First thing I printed and this really helps. I had 34% humidity in the room and AMS when I first installed, couple hours later 10%!!

Works good but had to add a riser under it as I have the isolator feet, otherwise works well.

Downloaded all 11 packages so I can print a number of them and all look really good!

Works perfectly.

Works great!

Works great, the connection between the tablet support bar and the back plate is very loose but holds fine with the weight of a tablet on it.