The profile printed fine and the items work as described. This is an excellent project. Very creative use of the standard and materials. 1. I think the nubs should be lower - where the lid flexes more - to ease removal. As is, you need three hands to separate the lid from the base! I printed a version with the nubs removed. The lid stays on fine, still takes some effort to remove and does not fall off - even when turned upside down. 2. The size: Slightly too tall. Strictly speaking, they meet the Gridfinity standard of 14 mm for the bin and 4.4 mm for the stacking lip. However, most bins are 17.75 mm tall rather than 18.4 mm tall for a 2 unit bin with stacking lip. I'm attaching a picture of a bin from Ostat's generator overlapping this one. When stacking several they accumulate just enough height (~0.6mm each) to not stack evenly with a single printed bin. Overall well thought out and well engineered model.

printed at 177x177 used Bambu Gold - looks great

Might be the best of 4 I have printed so far - gets the balance of - light on filament/feels sturdy right. I added a center hole in the top to save a little filament - Plus I plan to use 'upside down' to make stacking as I need more levels easier. Thanks for the excellent design.

Printed well. Works great. Excellent fit and polished design. Thank you. Shown with my own Gridfinity bin.

printed well in Bambu Lab blue gray - works well -too

printed well - black and red for polarity - in battery replacement with 9v wall adapter

Printed well. Strong lighting highlights the surface texture (concentric). I may try ironing on the next print.

Thank you for the template - vert thoughtful. I used it to make a 4u deep version to match by other bins an stack.

worked great - printed well - design is excellent - thank you for sharing this helpful design

Printed well. Fast. Excellent as a noob your comments and write up is very informative. Thank you .

Printed well. Thanks

prints well - looks great - very solid even with the infill % set low - Thank you.

Deflector - printed fine works well - occasionally a poop sticks but not enough to be a concern with my mono color printer but may an issue with lots of color changes - not sure what the answer is but can take a picture if requested