works as it should but I have to remove the front cover of my P2S print head

printed well in black BambuLab ABS, I like the screwing mechanism!

well done in BambuLab ABS. 0,12mm HQ, will add the print profile for download here

Nice one!

printed great in BambuLab black ABS

Printed the +0,05mm version in black BabmuLab ABS

works well, printed in Black BambuLab ABS, thanks!

After going with just a green PETG version with holes in the holder and without lid for the bucket I decided to print the closed holder and the lid with black BambuLab ABS as I'm now often printing ABS. I hope this prevents some smell and heat loss while printing

Like the tilted angle, much better to read. Used BambuLab Black ABS. But a tight fit in my AMS PRO 2

Used BambuLab PETG-HF on my BambuLab P2S - clever design, once this is assembled it's stable enough

What a clever design :-) Although hard to assemble once this is done its's stable enough Used BambuLab PETG-HF on my BambuLab P2S

Thanks

Nice print

useful print with and for my P2S Black BambuLab ABS and Green BambuLab PETG (the Y piece itself failed due to bad bed adhesion, so I reprinted it with ABS - other users had similar issues)

This one was printed mit Prusament Marble Grey PLA which seems to be rough enough on the outside without sanding! Update; same for Prusament Galaxy Black

works but overall the lid is somewhat too flimsy. Used BambuLab ABS black on my P2S

Mit first ever ABS print on my new P2S with AMS2 - perfect result with BambuLab Black ABS

Used BambuLab green PETG, everything ok but a loose fit, this might lead to vibrations. Original screws worked for me

Nice and stable! Used white PLA

simple and useful, thanks