A very useful item to print. This keeps the bearings nice and clean. I printed it in black PETG on a carbon fiber transfer plate. I didn't change any of the print settings and it came out perfect the first print.

This is a great little stand for the F1 display. A quick clean and easy print. I printed it in generic black PLA.

I really cool display to track the raceses! The print is really good and comes out nice and clean. I printed it with generic PLA. No problems!

A nice clean quick print to display the cars. The stand displays the car in a way that doesn't take up a lot of space. I printed it with generic black PLA.

This is a well designed pixel snap phone holder. I printed it out of off white PLA. I printed nice and clean with no issues. The pixel snap wireless charger fits in nice and snug so it doesn't come out when you pull the phone off of it. It also has a good balance so it doesn't tip over when the phone is on it. Great design. Thank you.

Nice easy and clean print. I printed with basic black PLA and added some rubber pads on the bottom so it won't slide around the desk. It lifts my monitor and frees up some space so I can put more junk on m desk.

Awesome bookmark. I printed it with a stary textured transfer pattern plate. I used PLA for all of the colors. It prints quick clean and easy.

This is an awesome design! I printed it in white PLA at 0.08 High Quality to make sure it looked the best. I did have some issues trying to get the moth to print but it came out great.

Very cute little snowmen for the holidays! Clean print with good supports and easy removal. I printed them in white PLA with the 0.08 high quality layers just to make sure the tops of their heads didn't show to much layer stepping.

This was a quick and easy print. I printed it with black PLA to make it blend in better in my plant. I didn't have to change any settings.

Nice design. Easy to print. I printed it white PLA on a textured bed even though the bottom cannot be sean. The supports and set up worked out really good. The support just snapped off.

I printed this as is but the clip for the multimeter leads was to big for the ones I have. the default was 117% so I reprinted at 105% and it works perfect. I used black PLA on a texted bed and turned on ironing.

Nice simple print no supports needed. I printed it black PLA. Will see how the PLA holds up after several uses. I have used it on a bottle and it works great to help give you grip. I printed it with the textured plate and set it to iron the other side.

Perfect print. I love all of the available sizes. Just measure your device and select the one to print! I used a white PLA and printed it upside-down so the texture would be on the top surface and only one support was needed for the middle hook.

The print is nice and easy. I used a marble PLA. I changed the layer 0,12mm and printed the lib with its top face down to get the texture of the build plate. I also decreased the infill to 10% and turned off the ironing since I flipped the lip upside down from the 3mf file setup.

I love this design. It ported easily. I printed it with a silk multicolor PLA.

These printed great. I used a generic PLA in different colors. They work great and have lasted a long time.

The design fits perfectly.

Printed with a multi colored PLA.