Perfect! Printed out of PETG.

Nice model, we added an opening for the usb port on the bottom. It also make sense to cover it for protection.

Nice model. We printed a black cat rotated 45 degrees to reduce color changes.

Scaled down to 70%, added kid's name, turned out great. Everything fit together great even scaled down. Used a bit of superglue to hold parts together. Holes are too small for screws but we used nails to secure to wall.

printed several 3-color and a few 2-color variants. Even tried with 0.2mm nozzle on the smooth PEI sheet that came out amazing.

I only have 3 build plates for the time being, so only two slots are used at a given time, but this adds expandability. I like that it fits snug to either side of the H2S. I use the two slots near the printer for better stability. Printed out of creality hyper pla, 0.6mm nozzle. Honeycomb infill, so it's honeycomb inside too :) Haven't tuned the filament, so the top surface is not perfect, but perfect for the job. I like this bambu color combination :) Fits the build plates well. I thought it would benefit from snapping under the printer or attaching some other way, but it seems balanced enough that it won't fall over even during very intense prints.

I've put one of the stickers on it which came with the printer :) Printed out of creality hyper pla. blade is a very very tight fit, I had to fight it. But it won't come loose