this thing is so cute and printed flawlessly. Supports came off so easily and the detail is great!

This turned out perfectly! slowed the speed down and used a 0.6 nozzle, increased wall looops and bottom shell layers. changed infill to gyroid and added a small manual brim just incase. printed In BL PLA matte desert Tan.

amazingly functional print. need these for every roll of tape in the house!

Stunning print! I used the E27 (E26) adapter and printed everything in Bambu Lab PETG HF. Slowed speeds down for a better guarantee of quality from the presets.

impeccable fit and great design! Took a while to print but came out perfectly!

Excellent print! I scaled it up 230%, used a 0.6 nozzle and slowed down the speed from the presets! Nozzle: 0.6mm Hardened Steel • Layer Height: 0.3mm • Wall Generator: Arachne • Wall Loops: 3 • Bottom Shell Layers: 5 • Sparse Infill: 10% Gyroid • Nozzle Temperature: 230°C • Max Volumetric Speed: 15 mm^3/s • Outer Wall Speed: 80 mm/s • Inner Wall Speed: 120 mm/s • sparse infill Speed: 150 mm/s • Internal solid infill Speed: 80 mm/s • Brim: Outer Brim Only (10mm width) • Supports: Disabled Printed in BBL PLA Basic two tone filament.

Great print, fits the super lube brand grease and oil tubes perfectly. Only annoying thing is the feet had the cut outs for magnets and they were on every foot of the unit which I'm sure added some time to the overall print. It's a long print, but worth it for the polished look and custom fit.

Incredible print with no issues fitting the nozzles. very satisfying!

As expected, very clean and precise print!

Prefect print and fits the official Bambu Lab Swatch boards perfectly

beautiful, simple, and very effective print - does exactly what it’s intended for and the two pieces fit together perfectly. Printed in Bambu Lab PETG-HF Dark Grey.

great system and pieces fit together perfectly. profile was incredible apart from a bit of delamination on corners of the hose adapter piece. probably need to set the slicer to slow down on that area.

absolutely flawless print. fit and function is perfect.

prefect! printed in Bambu Lab PETG HF dark grey.