I kept starting a new print before remembering to do a maintenance. By putting a tag on the door handle I reminded myself.

I made some badges to help me keep track of my filaments. They have interchangeable tiles that can be popped out of the "temporary" holders, or stay put in the "permanent" holders. I just velcro them to my cabinet, drawers, dehydrator and AMS. They are multi color, but I made them so there is only one color change for each print.

I’ve got quite a bit of Packout. I really like having the drawer units on wheels to move around my shop. For years I thought about how I could make something that would let me put a packout crate in-between two drawer modules. I always had units on top of a stack, but I kept thinking I could figure out a way to put them in the middle by raising up one unit. It’s a set of brackets that clamp onto the rails of the packout and then use a piece of 1/2” x 1/2” square tubing to provide the support.

I made this tray to keep track of the screws that need to be removed when you pull off the back panel of an X1. After having to do this a couple of times I realized that having a piece of paper with them all labelled to lay out was pretty old school consider I could just print something much better! It's small enough to print on an A1 mini because my X1 is out of commission... hence the need to pull the back cover off.