Extension Pole / Broomstick / Roller Pole coupler

So you got your new drone from Christmas stuck in a tree already and you don't have a stick long enough to get it down? Well now you maybe can get it down. This is a coupler that will let you thread together most common broom sticks, extension poles, and paint roller \ lightbulb changing sticks. It's a good thing to print and just leave on your extension pole and just use it as a thread protector until you need it. There are two versions depending on how fast you want to print and how much filament you want to use. The basic one will pretty reliably be able to hold two poles together vertically without breaking. The stronger one is better if you're trying to reach something more horizontal. Be careful when using it horizontally because the pole itself may not be designed for that level of strain, and you don't want to break the tip off your extension pole / broom stick. I made this for ACME thread tools. I'm not sure if Europe or Asia has a different standard for this, but I doubt it. Let me know in the comments!