Wet wipes box - Free 3D Print Model

Search models, users, collections, and posts

dymek34

Household>Other House Models

IP Report

Print Profile(1)

All

P1S

P1P

X1 Carbon

X1E

H2D

H2D Pro

H2S

P2S

H2C

X2D

A2L

0.2mm layer, 2 walls, 15% infill

Designer

3.1 h

2 plates

4.7(19)

Open in Bambu Studio

Boost

157

394

463

257

Released

Description

Wet wipes box, easy to assemble without additional elements. The pins holding the flap should be glued after inserting a piece of filament and the flap.

Please pay attention to glue the pins as in the drawing below, the holes are not in the middle.

wet

wipes

Box

Comment & Rating (24)

@ErverNL

Boosted

Adjusted the hight to 38 mm to fit zwitsal billendoekjes and it works excelent. Thnk you for the great work!

@Tigora86

What exactly did you use as pens

Show original

@MiladyP

Replying to @Tigora86 :

Chiming in, I unfolded a jumbo paperclip and cut it to size. Seems to work well.

@MiladyP

The bottom is just the tiniest too big for the box and didn't fit. I took a file to the corners and reduced them a bit and finally got a good fit. I used a flattened jumbo paperclip for the pin that goes through the lid.

(Edited)

@user_3005282742

Print Profile

0.2mm layer, 2 walls, 15% infill

Printed perfectly. I love it.

@Norbert007

Print Profile

0.2mm layer, 2 walls, 15% infill

fits together really excellently. I wouldn't have thought that at first. Thank you very much!

Show original

@ROBODOG

Print Profile

0.2mm layer, 2 walls, 15% infill

Works great, Thanks!

@user_3532812890

Print Profile

0.2mm layer, 2 walls, 15% infill

looks very good. Printing was easy. Thank you very much

Show original

@Print_Lady_95

Print Profile

0.2mm layer, 2 walls, 15% infill

Guter Druck

@user_831492638

Are you saying that we need to cut a piece of unused filament to use as the pivot point between lip and the top?

@Linnie

Print Profile

0.2mm layer, 2 walls, 15% infill

hard to get the fill out and put together

@user_2631127445

Print Profile

0.2mm layer, 2 walls, 15% infill

License

This user content is licensed under a Standard Digital File License.

You shall not share, sub-license, sell, rent, host, transfer, or distribute in any way the digital or 3D printed versions of this object, nor any other derivative work of this object in its digital or physical format (including - but not limited to - remixes of this object, and hosting on other digital platforms). The objects may not be used without permission in any way whatsoever in which you charge money, or collect fees.