7 Sided Magnetic Scan Marker for Creality Scanners - Free 3D Print Model

Search models, users, collections, and posts

3d-PrintCreator

Tools>Measure Tools

IP Report

Print Profile(1)

All

P1S

P1P

X1 Carbon

X1E

A1 mini

H2D

H2D Pro

H2S

P2S

H2C

X2D

A2L

0.2mm layer, 6 walls, 25% infill

Designer

4.3 h

1 plate

4.4(9)

Open in Bambu Studio

Boost

181

Released

Description

These are 10mm DOTS to be used as a marker when scanning with a 3D scanner.
The 10mm Dot size is chosen because this seems to be the perfect size for my Creality Scan Ferret scanner, and now the scanner is much better than it ever was.

This is a 2 colored print, that will need black and white filament. I used PLA for this print.
There is a pause included to insert the magnets. They should be 12mm x 2mm, Neodium Magnets.

NOTE: If you are using a scanner that uses lasers as a light source, you need to add the original reflective markers to the models. For scanning in the NIR mode, or with scanners that only scan in NIR (like the Scan Ferret), you don't need to do anything.

If you like these, please show some appreciation and like the model. Also, please show your make and share your comments with me.

Comment & Rating (16)

@k2techdesigns

Print Profile

0.2mm layer, 6 walls, 25% infill

Thanks!

@user_1392797132

Do you know if theese work without reflective markers when used with a Creality Ferret PRO?

The designer has replied

@3d_printcreator

Yes, The ferret Pro uses NON reflective markers. This item is made for my own Ferret Pro. Yet, when attaching the REFLECTIVE stickers, you can ALSO use it for the scanners that use REFLECTIVE markers.

@Thecrow17

Print Profile

0.2mm layer, 6 walls, 25% infill

nice print

The profile uploader has replied

@3d_printcreator

Hi there, Thank you so much for leaving a review on my design. I noticed you gave it three stars, which usually means there’s some room for improvement. Since you didn’t mention what you’d like to see changed, I’d love to ask if you could let me know your thoughts. Maybe there’s something I can adjust to make the print even better for you. As you might know, a review below four stars can actually be quite harmful for a creator. It means points are deducted from the design because Bambu Labs assumes there might be issues or flaws. That’s also why I’m reaching out, I really want my designs to be as close to perfect as possible, so if there’s anything I can improve, I’d be very grateful to hear about it. Who knows, maybe after some changes, you’d be open to updating your review to four stars or higher? That would really help me keep my karma healthy on MakerWorld, and I’d truly appreciate it. Thanks a lot in advance for your reply! Best regards, Brian Dragtstra

(Edited)

@bansheeboys78

Print Profile

0.2mm layer, 6 walls, 25% infill

Printed very well.

The profile uploader has replied

@3d_printcreator

Hi bansheeboys78, Thanks for your rating !!! Since it's not a 5 star rating, can you please tell me what I can improve so that you would like the scanning dots even more? I would love to have your feedback and improve my scanning dots even more. Thanks.

@user_226351000

Print Profile

0.2mm layer, 6 walls, 25% infill

Perfect after printing

The profile uploader has replied

Show original

@3d_printcreator

hi, thanks for your rating. Since this is a less than four stars rating, it affects my earnings, so I would really like to hear from you what could make your experience with this print better? is there something you would like to see different, or should I change something to the profile I made, please let me know so I can learn from it. Thanks in advance.

@silvestro_666

This only downloads a 3mf file that is corrupted?

@user_844758387

just what I needed. Also saved me some money instead of purchasing from RevoPoint. Outstanding! Works really well with my 3D scanning. Thank you!

@dieter.lichtens

Print Profile

0.2mm layer, 6 walls, 25% infill

@PileofRedstone

Boosted

Print Profile

0.2mm layer, 6 walls, 25% infill

@jjy3742

Print Profile

0.2mm layer, 6 walls, 25% infill

License

This user content is licensed under a Standard Digital File License.

You shall not share, sub-license, sell, rent, host, transfer, or distribute in any way the digital or 3D printed versions of this object, nor any other derivative work of this object in its digital or physical format (including - but not limited to - remixes of this object, and hosting on other digital platforms). The objects may not be used without permission in any way whatsoever in which you charge money, or collect fees.