Print Profile(1)
Description
A beautiful pendant lamp with an industrial design easy to use and easy to fix !
Max diameter of 20 cm, so it can be printed on most of the 3D printing machins.
Diameter of the electric cable must be less or egal to 6 mm.
Instructions:
Glue one of the two "Wire lock 2" object to "Cover", be careful to put in the right direction so you can insert the screws. Use the “Wire block 1” object to adjust and fix the lamp cap at the required height. Do the same thing with the “Wire block 2” object to adjust and fix the cover height.
If you don't use my printing profile, just remember to print 2 the "Screw for wire block 2" file.
Print screwed parts at a hight resolution (0.1mm with min 20% infill), other parts can be print at 0.2 mm with 10% infill.
Be sure to print screwed parts parallel to impression surface in order to avoid gravity deformations.
Please let me see your makes !
Enjoy !
Boost Me (for free)
License
You shall not share, sub-license, sell, rent, host, transfer, or distribute in any way the digital or 3D printed versions of this object, nor any other derivative work of this object in its digital or physical format (including - but not limited to - remixes of this object, and hosting on other digital platforms). The objects may not be used without permission in any way whatsoever in which you charge money, or collect fees.
Comment & Rating (6)