PETG GREENHOUSE for Gridfinity Seed Starting Trays

Print Greenhouses that sit on top of your Drip Trays

This requires and matches the Drip Trays from the parent Model:

https://makerworld.com/en/models/965052

Create a safe & humid environment for your seedlings to start their growth! A Greenhouse provides light while keeping humid conditions to maximize success 🌱🌞💦

You will need PETG Translucent filament, I used Translucent Pink for the Bambu Store - any color will work. I linked below all the PETG Translucent Filaments I recommend from the BambuLab Store.

I also recommended a Smooth Printing Plate, a Textured Plate will work just fine but the TOP will be slightly less glassy / see trough. Will make no difference on the walls.

IMPORTANT READ BEFORE PRINTING

• This is not the easiest print due to the nature of PETG. The greenhouses walls are very thin (2 walls ~ 0.8mm) and PETG can warp very easily. You will need to have your printer fully enclosed (I used the P1S closed).
• Recommended: TURN THE AUX & CHAMBER FANS OFF during the print, PETG this thin is sensitive to rapid cooling making it warp, resulting in a bad fit and less transparency.
• When your print is done, let it cool down at least 5 minutes before removing. I recommend when the plate temperatures drops below 45C degrees.

Sizes currently available:

1x1 | 1x2 | 1x3 | 1x4

2x2 | 2x3 | 2x4 | 2x5

3x3 | 3x4 | 3x5

4x4 | 4x5

5x5

A1 Mini sizes available:

1x2 | 1x3 | 1x4

2x2 | 2x3 | 2x4

3x3 | 3x4

4x4