Tough Case midsize with latches, print in place
Print Profile(2)
Description
Boost Me (for free)
Hello! If you find this little case useful consider boosting me so I can continue designing more useful stuff!
This is a handy midsize tough case that prints in place with built in latches.
A smaller version can be found here
Small Case with removable divider, print in place
Printed on supertack plate. If the case is printed on the textured PEI Plate I would recommend a small brim to keep it from warping.
Before removing the case from the build plate I suggest waiting for it to cool down, again this will help to avoid wapring.
Please keep 0.2 mm layer height otherwise the two halves of the case might not print flush to the print bed and you will get
an error that the model has floating parts.
I designed it in Fusion 360 inspired by many lessons on YouTube an other builds on Maker World.
Printed in Bambulab yellow matte PLA.
If you find this useful please consider leaving an nice comment, liking, saving and rating!
Happy Printing!
License
You shall not share, sub-license, sell, rent, host, transfer, or distribute in any way the digital or 3D printed versions of this object, nor any other derivative work of this object in its digital or physical format (including - but not limited to - remixes of this object, and hosting on other digital platforms). The objects may not be used without permission in any way whatsoever in which you charge money, or collect fees.
Comment & Rating (4)