Box for MTG Ability Tokens 20x20mm

This is a storage and access box for Magic The Gathering Ability Tokens, aka. Keyword Counters. This box holds lots of 20x20mm Ability Tokens, including the tokens shown in the pictures.

If you like my work, and you don't mind, please Like this model, Follow me, and consider providing a Boost. Thanks!

Details of this model:

1. Has space for 14 different 20x20mm square tokens. Each stack can hold 5 tokens that are 2mm thick, or 10 that are 1mm thick. 
2. All edges are chamfered for a very nice look and feel. It holds the tokens securely, but they are visible and easy to remove and load.
3. The lid latches on to the base to keep the tokens safe, but is easy to remove, because it includes a cutout in the end to push it off the base. 
4. When in use, the lid can be flipped upside down, and slid back under the base, using the same groove and lip. This will keep the lid out of the way and raise the base to provide easy access to the tokens.  See picture.
5. As shown in the picture, this is designed for printing in two colours, either with an AMS, or without. The colour changes are minimal, only at a few layers, but the pinstripes are very elegant so this will look awesome on the table. 
6. It can also be printed in a single colour if you prefer. 

Here are Matching MTG Ability Tokens. 

Printing Options

Profiles are provided for 3 different printing approaches:

1. Print in 2 colours with an AMS (simplest)
2. Print in 2 colours without an AMS, swapping colours at pauses that are defined in the profile
3. Print in 1 colour

If you're a veteran 3D printer, just grab the profile you want and print; you know what you are doing. If you're new or uncertain, there is detailed printing instructions below in the Documentation section. 

Black and Green filaments like those shown are linked in the BOM below. 

This model is created from scratch, but was inspired by https://makerworld.com/en/models/488032?from=search#profileId-400897. Check it out and take your pick.

Just Keep Printing!

GC3D