Toothbrush Sanitizer Holder_V8
Print Profile(1)
Description
This model is designed for printing on the P1S and A1; adjust print settings as needed.
For optimal sanitation, a 220V power supply is required.
If you are unable to source or unwilling to install a UV sterilization lamp, it is optional; effective drying will still maintain cleanliness.
Given the electrical components, a multimeter is recommended for troubleshooting.
The circuit uses wire caps and spring terminals; if unavailable, twisting the wires together is acceptable, provided no short circuits occur.
The filament parameters used are the Bambu Lab PETG defaults, which can be optimized as needed.
High-strength filaments such as PETG and ABS are recommended. PLA is not advised due to insufficient strength.
I personally used PETG; experienced users may utilize it, but beginners are cautioned against it.
Documentation (8)
License
You shall not share, sub-license, sell, rent, host, transfer, or distribute in any way the digital or 3D printed versions of this object, nor any other derivative work of this object in its digital or physical format (including - but not limited to - remixes of this object, and hosting on other digital platforms). The objects may not be used without permission in any way whatsoever in which you charge money, or collect fees.
Comment & Rating (0)