wuboo

cover

IMG_0426.jpg

IMG_0433.jpg

IMG_0427.jpg

IMG_0431.jpg

IMG_0434.jpg

IMG_0428.jpg

IMG_0430.jpg

IMG_0432.jpg

IMG_0436.jpg

IMG_0452.jpg

IMG_0441.jpg

IMG_0453.jpg

IMG_0410.jpg

IMG_0420.jpg

Main Display

plate_1.png

Float Display

plate_2.png

Float Diffuser

plate_3.png

Balance Float Display

plate_4.png

All Parts - 0.2mm layer, 2 walls, 15% infill

You shall not share, sub-license, sell, rent, host, transfer, or distribute in any way the digital or 3D printed versions of this object, nor any other derivative work of this object in its digital or physical format (including - but not limited to - remixes of this object, and hosting on other digital platforms). The objects may not be used without permission in any way whatsoever in which you charge money, or collect fees.

This user content is licensed under a Standard Digital File License.

<boostme><boosttitle>Boost Me</boosttitle><boostcontent>Drop a boost to get better luck balancing the floating piece! :)</boostcontent></boostme><p>The deer on display was created by:</p><p><a target="_blank" href="https://makerworld.com/en/models/86094#profileId-94609" rel="nofollow noopener">https://makerworld.com/en/models/86094#profileId-94609</a></p><h3>CAUTION</h3><p>Please read through the online overview for tips and important info before beginning this little adventure:</p><p><a target="_blank" href="https://us.store.bambulab.com/collections/makers-supply/products/magnetic-levitation-diy-kit?variant=43072975929480" rel="nofollow noopener">https://us.store.bambulab.com/collections/makers-supply/products/magnetic-levitation-diy-kit?variant=43072975929480</a></p><h3>Assembly</h3><figure class="image"><img src="https://makerworld.bblmw.com/makerworld/model/DSM00000000991227/design/2025-01-13_4481f78ce3aaa.jpg"><figcaption>Put the stand on the main display. You can glue it if you want. The holes on the bottom are to assist with airflow and keeping the base cool.</figcaption></figure><figure class="image"><img src="https://makerworld.bblmw.com/makerworld/model/DSM00000000991227/design/2025-01-13_5d5d0aa58bd2.jpg"><figcaption>Remove the 3D printed case. Place the Magnetic Levitation Base on to the 4 pins. Either glue or use double-sided tape to secure the touch switch to the lid. Make sure the wires are on the opposite side of the notch.</figcaption></figure><figure class="image"><img src="https://makerworld.bblmw.com/makerworld/model/DSM00000000991227/design/2025-01-13_d2bbaa49503a8.jpg"><figcaption>Insert the power cable and secure it using the attached hex screw.</figcaption></figure><figure class="image"><img src="https://makerworld.bblmw.com/makerworld/model/DSM00000000991227/design/2025-01-13_e4f0b07ccc66a.jpg"><figcaption>Put on the lid and attach the power cable. BASE COMPLETE.</figcaption></figure><figure class="image"><img src="https://makerworld.bblmw.com/makerworld/model/DSM00000000991227/design/2025-01-13_1d185f2f76ad5.jpg"><figcaption>There are TWO floating display designs. If the object you are displaying does not have an even weight distribution, then print the balancing float display so you can add the stainless steel balls from the kit to counter the weight so it is level. Assembly is the same for both…</figcaption></figure><figure class="image"><img src="https://makerworld.bblmw.com/makerworld/model/DSM00000000991227/design/2025-01-13_fea3a99f8b5a5.jpg"><figcaption>Remove the 3D printed case. Insert the coil &amp; Magnetic Levitation Float with the LED light on top. ***The distance of the coil to the base will impact the brightness of the light. You can add the coil support (as seen on the right)  to provide further distance from the base if needed. I found that my light was brighter without the coil support piece. Test out both options and see which is better for you.</figcaption></figure><figure class="image"><img src="https://makerworld.bblmw.com/makerworld/model/DSM00000000991227/design/2025-01-13_e850094e8f6e1.jpg"><figcaption>Add the lid to secure the LED light &amp; magnet. BE CAREFUL NOT TO PINCH THE COPPER WIRES! Trust me… They break easily.</figcaption></figure><figure class="image"><img src="https://makerworld.bblmw.com/makerworld/model/DSM00000000991227/design/2025-01-13_98ce8b3a5b506.jpg"><figcaption>Add the diffuser lid and you are ready to go! May the gravity gods be with you as you attempt to balance the top piece…</figcaption></figure><p>&nbsp;</p><figure class="image"><img src="https://makerworld.bblmw.com/makerworld/model/DSM00000000991227/design/2025-01-13_e203666b059af.jpg"><figcaption>This design meets all guidelines and recommended specs suggested by the provided documentation.</figcaption></figure>

Illuminating Levitation Display

ASIA

Print Profile(1)

Bill of Materials

Description

CAUTION

Assembly

Comment & Rating (4)

License

Related Models