McFlurry Button Fidget

Ba-la-la-ba-bah~, a delightful McMuffin ice cream cone-shaped fidget button, a stress-relieving clicker. I began learning 3D printing and modeling in August 2024 and designed a series of button toys, but due to technical limitations, I couldn't continue updating them. Recently, I rediscovered them in my neglected inspiration archive and decided to update these cute little button toys, haha.

20250714 V2 Update:

For well-known reasons, the logo has been removed and the model re-uploaded~

Recommended Switch:

The model does not include mechanical keyboard switches; you need to purchase them separately. You can find affordable options on Taobao or Pinduoduo. If you're unfamiliar with them, I recommend choosing blue switches. Switches without dust guards are advised.

Installation Instructions:

1. Please trim off the four long, thin protrusions inside the lid.

2. Pay attention to the installation orientation. The cross-shaped structure has a longer side, which corresponds to the longer side of the switch. It is recommended to not install the base first. Instead, assemble and test the top cover and switch, ensuring it springs back properly before attaching it to the base.

3. If the fit isn't quite right, gently enlarge or fill the holes. If the issue persists, you may need to adjust the print parameters to compensate, apologies for any inconvenience.

Filament Selection:

I used PLA for testing and haven't tried PETG yet. If you encounter issues with holes being too large or small, please fine-tune the hole compensation.

If you are interested, you can also view my other button fidget designs (click the image below to jump), thank you for your support~