Aztec Eagle
Print Profile(1)
Description
Project: AGUILA AZTECA.hfp
Print at 100% infill with a layer height of 0.12mm with a base layer of 0.32mm
The Model is 111.11x200mm in size
You may print at higher layer heights below the Min Depth of 0.36mm
The Max Depth is 2mm and the Actual Depth is 1.8mm
Filaments Used:
PLA ESUN NEGRO Transmission Distance: 0.2
PLA BambuLab Basic Blue Gray Transmission Distance: 3
PLA BambuLab Basic Jade White Transmission Distance: 5
This print uses 3 unique filaments
Swap Instructions:
Start with NEGRO
At layer #3 (0.56mm) swap to Blue Gray
At layer #7 (1.04mm) swap to Jade White for the rest.
License
You shall not share, sub-license, sell, rent, host, transfer, or distribute in any way the digital or 3D printed versions of this object, nor any other derivative work of this object in its digital or physical format (including - but not limited to - remixes of this object, and hosting on other digital platforms). The objects may not be used without permission in any way whatsoever in which you charge money, or collect fees.
Comment & Rating (0)