Magnetic Holders for Integrated Circuits and Other Components
Print Profile(1)
Bill of Materials
- aimant circulaire néodyme 5mm x 3mm x 3: aimant circulaire néodyme 5mm x 3mm
Description
I have created these small magnetic supports to hold electronic circuits and other components (model making, DIY projects, etc)
It consists of a tip that can be inserted into the holes of PCB boards, a 1mm groove located at a height of 14mm, and a second 1mm groove located at a height of 18mm (1mm being generally the thickness of a PCB circuit).
Under the base are three small recesses for three small 5mm x 3mm neodymium disc magnets. You will need to source these magnets yourself; they clip into the holes. The supports magnetize to a metallic surface.
The profile is optimized for Bambu Lab PLA+. Print speeds have been adjusted for a more precise top surface. The layer height is 0.08mm.
I recommend printing with the project profile.
For one-time support and to help me create more, you can also buy me a coffee here:
License
Comment & Rating (2)