Crosman EasyPump Handle - 1377/1322/13xx

I always loved the idea of the Crosman 1377 and its siblings, mainly due to the lack of external pump required, however It always annoyed me how awkward it was to pump up. This creation doubles the leverage you get while pumping making it much more comfortable to use.

I saw a few people online come up with similar solutions online however they were either wood or metal, which are both more difficult than a 3D Print, and I think this looks very nice too.

I had issues with warping the first few tries due to it being a skinny and short print, but only on the side of the Aux fan, and after turning that off it worked perfectly, so keep that in mind.

Assembly is made simple with the printed alignment pins and some superglue/CA Glue, but I do recommend a dry fit to confirm they are short enought for the halfs to come together completely. If not then trimming the pins 1-2mm with some snips should help.

There are 2 versions:

The standard left and right are for use with the default pistol grips provided on the 1377/1322 etc.

The extended left and right are for use with the crosman 1399 stock, as the grip is slightly extended.