Build Plate Side Holder for P1S / P2S BPH_V7
Print Profile(2)
Description
This is a variant of my build plate holder design.
It holds 5 build plates, with a back stop to keep the plates from sliding all the way through.
This holder uses small hooks that fit in between the side panel and top glass panel.
It's a tight for for the P1S. I've seen ratings that show it not fitting for the X1C so it's not recommended for the X1C.
This new design has hooks on both ends so that it can be mounted on either side of the printer.
The print profile does not need support and I added a brim to ensure bed adhesion.
I oriented, and spaced the part as close to the auxiliary fan to help with cooling on the overhang regions.
DO NOT RUN ANY OF THE PROFILES AT LUDICROUS SPEED. YOUR PRINT WILL FAIL.
*** Cant afford a P2S right now so I cant confirm that it will work on the P2S…***
Boost Me (for free)
A boost would be greatly appreciated!
I have an open ended plate holder here.
https://makerworld.com/en/models/706622#profileId-636611
Here is my offset model with room for 4 build plates:
https://makerworld.com/en/models/2561289-p1s-p2s-build-plate-holder-offset#profileId-2822106
License
You shall not share, sub-license, sell, rent, host, transfer, or distribute in any way the digital or 3D printed versions of this object, nor any other derivative work of this object in its digital or physical format (including - but not limited to - remixes of this object, and hosting on other digital platforms). The objects may not be used without permission in any way whatsoever in which you charge money, or collect fees.
Comment & Rating (335)